EUP9232
(12) Test Condition 12, Test Circuit 6
Set V1=0V and V2=3.6V and V3=12V, and Increase V1
gradually. The V1 voltage when CO=”H” (VVM+0.3V or
higher) is the 0V charge inhibiting voltage 1(V0INH1).
(13) Test Condition 13, Test Circuit 6
Set V1=3.6V and V2=0V and V3=12V, and Increase V2
gradually. The V2 voltage when CO=”H” (VVM+0.3V or
higher) is the 0V charge inhibiting voltage 2(V0INH2).
(14) Test Condition 14, Test Circuit 1
Set S1=ON, V1=V2=3.6V and V3=0V under normal
condition. Increase V3 from 0V to 1.5V immediately
( within 10 us ). The time after DO goes “L” is the
overcurrent detection delay time 2 ( tIOV2 ).
DS9232 Ver1.1 Feb. 2007
11
EUTECH [ EUTECH MICROELECTRONICS INC ]
