EUP8086
Pin Configurations
Package Type
Pin Configurations
TDFN-12
Pin Description
Pin
1
2,8,10
3
4
5
6
7
9
11
12
PIN
FB
GND
EN_BUCK
EN_BAT
ISET
BAT
STAT
ADP
LX
VIN
DESCRIPTION
Feedback input. This pin must be connected directly to an external resistor divider.
Nominal voltage is 0.6V.
Ground.
Enable pin for the step-down converter. When connected to logic low, the step-down
converter is disabled and consumes less than 1µA of current. When connected to
logic high, it resumes normal operation.
Enable pin for the battery charger. When internally pulled down, the battery charger
is disabled and it consumes less than 1µA of current. When connected to logic high, it
resumes normal operation.
Charge current set point. Connect a resistor from this pin to ground. Refer to typical
curves for resistor selection.
Battery charging and sensing.
Charge status input. Open drain status output.
Input for USB/adapter charger.
Output of the step-down converter. Connect the inductor to this pin. Internally, it is
connected to the drain of both high- and low-side MOSFETs.
Input voltage for the step-down converter.
DS8086
Ver 1.0
Apr. 2008
3