EUA6204
Package Information
DFN-8
NOTE
1. All dimensions are in millimeters, θ is in degrees
2. M: The maximum allowable corner on the molded plastic body corner
3. Dimension D does not include mold protrusions or gate burrs. Mold protrusions and gate burrs shall not
exceed 0.15mm per side
4. Dimension E does not include interterminal mold protrusions or terminal protrusions. Interminal mold
protrusions and/or terminal protrusions shall not exceed 0.20mm per side
5. Dimension b applies to plated terminals. Dimension A1 is primarily Y terminal plating, but may or may
not include a small protrusion of terminal below the bottom surface of the package
6. Burr shall not exceed 0.060mm
7. JEDEC MO-229
SYMBOLS
DIMENSIONS IN MILLIMETERS
MIN.
0.81
0
NOM.
0.9
MAX.
1.00
0.03
------
0.37
3.15
------
3.15
------
-----
0.45
------
------
------
0.05
0
A
A1
A3
B
0.015
------
0.25
2.85
------
2.85
------
------
0.25
------
------
------
------
-12
0.20 REF
0.30
D
3.00 BSC
2.3 BSC
3.00 BSC
1.5 BSC
0.65 BSC
0.35
D1
E
E1
e
L
aaa
bbb
ccc
M
θ
0.25
0.10
0.10
------
------
DS6204 Ver1.1 June. 2006
11