EtronTech
EM68C08CWAG
Figure 25. Seamless burst read operation: RL=5, AL=2, CL=3, BL=4
T0
T1
T2
T3
T4
T5
T6
T7
T8
CK#
CK
Post CAS#
READ A
Post CAS#
READ B
NOP
NOP
NOP
NOP
NOP
NOP
NOP
CMD
DQS
DQS#
AL=2
CL=3
RL=5
Dout A0 Dout A1 Dout A2 Dout A3 Dout B0 Dout B1 Dout B2
DQs
NOTE : The seamless burst read operation is supported by enabling a read command at every other clock for BL =
4 operation, and every 4 clock for BL =8 operation. This operation is allowed regardless of same or different banks
as long as the banks are activated.
Figure 26. Read burst interrupt timing: (CL=3, AL=0, RL=3, BL=8)
CK#
CK
Read A
Read B
NOP
NOP
NOP
NOP
NOP
NOP
NOP
NOP
CMD
DQS
DQS#
A0
A1
A2
A3
B0
B1
B2
B3
B4
B5
B6
B7
DQs
NOTE 1: Read burst interrupt function is only allowed on burst of 8. Burst interrupt of 4 is prohibited.
NOTE 2: Read burst of 8 can only be interrupted by another Read command. Read burst interruption by Write
command or Precharge command is prohibited.
NOTE 3: Read burst interrupt must occur exactly two clocks after previous Read command. Any other Read burst
interrupt timings are prohibited.
NOTE 4: Read burst interruption is allowed to any bank inside DRAM.
NOTE 5: Read burst with Auto Precharge enabled is not allowed to interrupt.
NOTE 6: Read burst interruption is allowed by another Read with Auto Precharge command.
NOTE 7: All command timings are referenced to burst length set in the mode register. They are not referenced to
actual burst. For example, Minimum Read to Precharge timing is AL+BL/2 where BL is the burst length set in the
mode register and not the actual burst (which is shorter because of interrupt).
Rev. 1.1
45
Apr. /2016
ETRON [ ETRON TECHNOLOGY, INC. ]
