AT commands
I/O settings commands
Default
1
P7 (SPI_SSEL )
This command applies to the XBee/XBee-PRO S2C 802.15.4 RF Module.
Sets or displays the SPI_SSEL configuration.
This only applies to surface-mount devices.
Parameter range
1, 2
Parameter
Description
Disabled
0
1
SPI_SSEL
Default
1
P8 (SPI_SCLK)
This command applies to the XBee/XBee-PRO S2C 802.15.4 RF Module.
Sets or displays the DIO18/SPI_CLK configuration.
This only applies to surface-mount devices.
Parameter range
1, 2
Parameter
Description
Disabled
0
1
SPI_SCLK
Default
1
P9 (SPI_ATTN)
This command applies to the XBee/XBee-PRO S2C 802.15.4 RF Module.
Sets or displays the SPI_ATTN configuration (pin 12).
This only applies to surface-mount devices.
Parameter range
1, 2
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
97
ETC [ ETC ]
