AT commands
I/O settings commands
Parameter range
0, 3
Parameter
Description
Disabled
N/A
0
1
2
3
4
5
N/A
Digital input
N/A
N/A
Default
0
P0 (RSSI/PWM0 Configuration)
This command applies to the XBee/XBee-PRO S2C 802.15.4 RF Module.
Sets or displays the RSSI/PWM0 configuration ().
This command enables the option of translating incoming data to a PWM so that the output can be
translated back into analog form.
If the IA (I/O Input Address) parameter is correctly set and P0 is configured as PWM0 output, incoming
AD0 samples automatically modify the PWM0 value.
Parameter range
0 - 2
Parameter
Description
Disabled
0
1
2
RSSI PWM0 output
PWM0 output
Default
1
P1 (PWM1 Configuration)
This command applies to the XBee/XBee-PRO S2C 802.15.4 RF Module.
Sets or displays the PWM1 configuration (TH pin 7/SMT pin 8).
If IA (I/O Input Address) is correctly set and P1 is configured as PWM1 output, incoming AD0 samples
automatically modify the PWM1 value.
Parameter range
0, 2
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
94
ETC [ ETC ]
