AT commands
I/O settings commands
Parameter
Description
0
0
1
2
3
4
5
Disabled
Unmonitored digital input
SPI_MOSI for the through-hole device
N/A
Digital input
Digital output, low
Digital output, high
Default
0
D5 (DIO5/ASSOCIATED_INDICATOR)
This command applies to the XBee/XBee-PRO S2C 802.15.4 RF Module.
Sets or displays the DIO5/ASSOCIATED_INDICATOR configuration (TH pin 15/SMT pin 28).
Parameter range
0, 1, 3 - 5
Parameter
Description
0
1
2
3
4
5
Disabled
Associate LED indicator - blinks when associated
N/A
Digital input
Digital output, default low
Digital output, default high
Default
1
D8 (DIO8/SLEEP_REQUEST)
This command applies to the XBee/XBee-PRO S2C 802.15.4 RF Module.
Sets or displays the DI8/DTR/SLP_RQ configuration (TH pin 9/SMT pin 10).
This line is also used with Pin Sleep, but pin sleep ignores the D8 configuration. It is always used to
control pin sleep, regardless of configuration of D8.
Note When using Pin sleep, the internal pull up/down resistor is not used
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
93
ETC [ ETC ]
