AT commands
Serial interfacing commands
Parameter range
0 - 0xFF (x character times)
Default
3
D7 (DIO7/CTS)
This command applies to the XBee/XBee-PRO S2C 802.15.4 RF Module.
Sets or displays the DIO7/CTS configuration (TH pin 12/SMT pin 25).
Parameter range
0, 1, 3 - 7
Parameter
Description
Disabled
0
1
2
3
4
5
6
7
CTS flow control
N/A
Digital input
Digital output, low
Digital output, high
RS-485 Tx enable, low Tx (0 V on transmit, high when idle)
RS-485 Tx enable high, high Tx (high on transmit, 0 V when idle)
Default
0x1
D6 (DIO6/RTS)
This command applies to the XBee/XBee-PRO S2C 802.15.4 RF Module.
Sets or displays the DIO6/RTS configuration (TH pin 16/SMT pin 29).
Parameter range
0, 1, 3 - 5
Parameter
Description
Disabled
0
1
2
3
RTS flow control
N/A
Digital input
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
89
ETC [ ETC ]
