Operation
Networking
enabled. On demand queries occur when the AI command is issued, which can occur in Command
mode, in API mode, or as a remote command.
Device Status Messages
Not all device status messages are related with association, but for completeness all device status
types reported by XBee/XBee-PRO S2C 802.15.4 RF Module are listed in the following table.
Type
0x00
0x01
0x02
0x03
0x06
0x0D
Meaning
Hardware reset.
Watchdog reset.
End device successfully associated with a coordinator.
End device disassociated from coordinator or coordinator failed to form a new network.
Coordinator formed a new network.
Input voltage on the XBee-PRO device is too high, which prevents transmissions.
Association indicator status codes
The XBee/XBee-PRO S2C 802.15.4 RF Module code can potentially give any of the status codes in the
following table.
Code
Meaning
0x00
Coordinator successfully started, End device successfully associated, or operating in peer
to peer mode where no association is needed.
0x03
0x04
Active Scan found a PAN coordinator, but it is not currently accepting associations.
Active Scan found a PAN coordinator in a beacon-enabled network, which is not a
supported feature.
0x05
0x06
Active Scan found a PAN, but the PAN ID does not match the configured PAN ID on the
requesting end device and bit 0 of A1 is not set to allow reassignment of PAN ID.
Active Scan found a PAN on a channel does not match the configured channel on the
requesting end device and bit 1 of A1 is not set to allow reassignment of the channel.
0x0C
0x13
0xFF
Association request failed to get a response.
End device is disassociated or is in the process of disassociating.
Initialization time; no association status has been determined yet.
Sleep
Sleep is implemented to support installations where a mains power source is not available and a
battery is required. In order to increase battery life, the device sleeps, which means it stops operating.
It can be woken by a timer expiration or a pin.
For more information about sleep modes, see Sleep modes.
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
47
ETC [ ETC ]
