High Speed Backplane Connectors
MULTIGIG RT Connector Products (Continued)
Product Selection Guide
(Continued)
Right Angle Plug
(Daughtercard) Connector
Half
Center Module
Half
Left End Module
Right End Module
PC Wafers (Blades)
Housing
Contact
Pads
Eye-of-Needle
Compliant Pin
Signal Contact
Alignment Pin
Full
Stand Alone
Module
Full
10.8 mm
Guide Module
7.2 mm
Guide Module
Left End Module
Right End Module
ESD Contact
(Inside Module)
(Optional)
Housing
No Key
Pilot Post
Screw Hole
Mounting Post
Key
Signal Modules
Plugs contain eye-of-needle
compliant pin signal
contacts and pc wafers
(blades). The housing
features alignment pins to
ensure correct orientation
on the pc board.
(having a screw hole or
threads) with or without a
key. The guide pins are
available with various length
mounting posts. The mount-
ing post is used with cus-
tomer supplied hardware to
attach the guide pin to the
pc board. Guide pins must
be chosen according to
The guide module features
a housing with or without a
key and with a screw hole,
mounting post, and pilot
post. The mounting post
and pilot post are used to
position the guide module
on the pc board, and the
screw hole is used with
customer supplied hard-
Tier 1 and Tier 2 recepta-
cles contain eye-of-needle
compliant pin signal con-
tacts; the Tier 1 receptacle
also contains ground con-
tacts. Each housing fea-
tures standoffs for thermal
venting, polarization ribs
(on end modules) and
polarization slots (on the
center module) for proper
stacking of the modules,
and polarization posts to
ensure correct orientation
on the pc board.
Guide Assemblies
The guide assembly
consists of a guide pin
(used with receptacles)
and a guide module (used
with plugs).
thickness of pc board being ware to attach the module
used; otherwise, interfer-
ence with proper mating or
damage to system compo-
nents will occur. Guide pins
with keys are available in
various keying positions.
to the pc board. The 10.80
[.425] and 9.00 [.354] guide
module is available with or
without an ESD contact
The guide pin features a
collar and mounting post
located inside the module.
142
Catalog 1773095
Revised 4-12
Dimensions are shown for
Dimensions are in millimeters
Canada: +1 (905) 475-6222
UK: +44 (0) 800-267666
reference purposes only.
and inches unless otherwise
specified.
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Specifications subject
to change.
www.te.com
USA: +1 (800) 522-6752
ETC [ ETC ]
