78XX
Typical Applications Circuit
For a positive regulator, a 0.33-|iF bypass capacitor should be used on the input terminals. While not necessary
for stability, an output capacitor of O.ljiF may be used to improve the transient response of the regulator. These
capaci- tors should be on or as near as possible to the regulator terminals. See Fig.1.
78XX
Fig. 1. Positive Regulator
Ordering Information
ORDERING NU MBER
PACKA
G
E
M ARKING
78XX
TO - 220
ET78XX / ESTEK7805
Address :
6A06--6A07
Rm 6A07,Changyin Office Building ,No.88,Yong Ding Road,Hai Dian District ,Beijing
Postalcode:100039
Tel: 86-010-58895780 / 81 / 82 / 83 / 84
Http://www.estek.com.cn
Fax : 010-58895793
Email:sales@estek.com.cn
REV No:01-060803
BEIJING ESTEK ELECTRONICS CO.,LTD
9
ESTEK [ Estek Electronics Co. Ltd ]
