ESMT
PSRAM
Features
‧Advanced
low-power architecture
• High speed: 55 ns, 70 ns
• Wide voltage range: 2.7V to 3.6 V
• Typical active current: 2 mA @ f = 1 MHz
• Typical active current: 11 mA @ f = f
MAX
• Low standby power
• Automatic power-down when deselected
M24L816512DA
8-Mbit (512K x 16)
Pseudo Static RAM
Functional Description
The M24L816512DA is a high-performance CMOS pseudo
static RAM (PSRAM) organized as 512K words by 16 bits that
supports an asynchronous memory interface. This device
features advanced circuit design to provide ultra-low active
current. This is ideal for portable applications such as cellular
telephones. The device can be put into standby mode
reducing power consumption dramatically when deselected
( CE1 LOW, CE2 HIGH or both
BHE
and
BLE
are HIGH).
The input/output pins(I/O
0
through I/O
15
) are placed in a
high-impedance state when: deselected ( CE1 HIGH, CE2
LOW), OE is deasserted HIGH, or during a write operation
(Chip Enabled and Write Enable
WE
LOW). Reading from
the device is accomplished by asserting the Chip Enables
( CE1 LOW and CE2 HIGH) and Output Enable ( OE ) LOW
while forcing the Write Enable (
WE
) HIGH. If Byte Low
Enable (
BLE
) is LOW, then data from the memory location
specified by the address pins will appear on I/O
0
to I/O
7
. If
Byte High Enable (
BHE
) is LOW, then data from memory will
appear on I/O
8
to I/O
15
. See the Truth Table for a complete
description of read and write modes.
Logic Block Diagram
Elite Semiconductor Memory Technology Inc.
Publication Date
:
Jul. 2008
Revision
:
1.1
1/12