Absolute Maximum Ratings
Stress in excess of Absolute Maximum
Ratings may cause permanent damage.
Absolute Maximum Ratings, sometimes
referred to as no destruction limits, are
normally tested with one parameter at a
time exceeding the limits of Output data
or Electrical Characteristics. If exposed to
stress above these limits, function and
performance may degrade in an unspecified
manner.
min
–45
–55
–0.5
Unit
Characteristics
max
+100
+125
+80
TC
TS
VI
Case temperature at full output power
Storage temperature
°C
°C
Continuous input voltage1)
Vdc
Isolation voltage
(input to output test voltage)
1,500
Vdc
VISO
Etr
Transient input energy
0.01
+16
+40
Ws
Vdc
Vdc
VRC
Vadj
–5
–5
Remote control voltage pin 11 ref. to pin 17
Output adjust voltage pin 8 ref. to pin 17
Input TC <TCmax unless otherwise specified
NOTES:
Characteristics
Conditions
min
typ
max
Unit
V
1)
The input voltage range 36…75 Vdc meets
the European Telecom Standard prETS
300 132-2 Nominal input voltage range in
48 V and 60 Vdc power systems,
–40.5…–57.0 V and –50.0…–72.0 V
respectively. Absolute max continuous input
voltage is 80 Vdc.
Input voltage range1)2)
Turn-off input voltage
36
75
VI
33.5
34.5
1.4
VIoff
VIon
CI
30.0
32.0
35.0
36.0
V
See typical characteristics
Turn-on input voltage See typical characteristics
Input capacitance
V
2)
The power modules will operate down to
mF
£35V, when VI decreases, but will turn on at
VI £36V, when VI increases (see also Operating
information).
240
250
(VI=53V)
(VI=66V)
PIi
Input idling power
IO= 0, TC=–30…+95°C
TC=–30…+95°C,
mW
mW
35
55
(VI=53V)
PRC
Input stand-by power
RC connected to pin 17 (VI=66V)
Connections
Pin
Designation
Function
1
2
Out 1
Rtn
Output 1(+).
Output return.
18 17 16 15 14 13 12 11 10
3-6
NC
Not connected. Galvanically Isolated from input pins.
Synchronization input.
7
Sync
Vadj
8
Output voltage adjust.
9
NOR
TOA
RC
Connection of Nominal Output voltage Resistor.
Turn-on/off input voltage adjust.
Remote control and turn-on/off input voltage adjust.
Not connected. Galvanically isolated from input pins.
Negative input.
10
11
12–16
17
18
1
2
3
4
5
6
7
8
9
NC
–In
+In
Positive input.
2
EN/LZT 146 79 R1A ©Ericsson Microelectronics AB, June 2001