Inductors
Helically wound power inductors
General technical data and measuring conditions
Rated inductance L
R
Inductance tolerance
Saturation current I
sat
B82559*A013
HPI 13
Measured with Wayne-Kerr 3260A/3265B,
measuring voltage 100 mV
±10%
Current that will result in approx. 20% drop in inductance
value.
Temperature response needs to be verified in specific
applications. Test results on request.
DC resistance
Solderability
Operating temperature
Weight
Characteristics and ordering codes
L
R
µH
0.50
0.95
1.1
1.4
2.2
2.4
3.0
3.9
I
sat
A
30
25
20
22
15
16.5
13
12
R
max
mΩ
1.1
1.4
2.2
1.8
4.2
3.2
5.1
6.0
Measured at 20 °C ambient temperature
235 °C, 5 s, wetting >90%
−40
... +130 °C
2.2 g (height = 4.95 mm), 2.6 g (height = 5.95 mm)
Height h
mm
4.95
5.95
4.95
5.95
4.95
5.95
4.95
5.95
Ordering code
B82559A0501A013
B82559A0951A013
B82559A0112A013
B82559A0142A013
B82559A0222A013
B82559A0242A013
B82559A0302A013
B82559A0392A013
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
++49 89 636 09, FAX (0 89) 636-2 26 89
EPCOS AG 2004. Reproduction, publication and dissemination of this brochure and the informa-
tion contained therein without EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of
the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic
Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
2
09/04