Leaded Varistors
Taping
Taping (leaded varistors)
All leaded varistors are available on tape.
Exception: S10K510 … K680, S14K510 … K1000, S20K385 … K1000.
Tape packaging for lead spacing
= 5 fully conforms to IEC 60286-2, while for lead spacings
= 7,5 and 10 the taping mode is based on this standard.
The ordering tables on page 213 ff list disk types available on tape in detail, i. e. with complete type
designation and ordering code. Taping mode and, if relevant, crimp style and lead spacing are cod-
ed in the type designation. For types not listed please contact EPCOS. Upon request parts with lead
spacing
= 5 mm are available in Ammopack too.
Designation system for taping mode
Type designation
bulk
Taped, reel type
G
G2
G3
G4
G5
Crimp style
(if relevant)
Lead spacing
(if relevant)
see page 208
default = no extra
designation
Taped, Ammopack
GA
G2A
see page 209
S
S2
S3
S4
S5
R5
R7
see page 212
Lead spacing
differs from
standard
version
Example SIOV-S10K250GS3R5
SIOV-S10K250
G
Taped
Reel type
I
Seating plane height
H
0
=16
Example SIOV-S07K60G2AS2
SIOV-S07K60
G2A
Taped
Seating plane height
H
0
=18
Ammopack
S2
Crimp style 2
—
—
S3
Crimp style 3
R5
Lead spacing 5,0
(differs from LS 7,5
of standard version
S10K250)
206
04/02