B44030
Screw terminals
Accessories
Clamp mounting
Screw-terminal capacitors without threaded stud and with a diameter
≥
64.3 mm can also be
mounted with ring clamps. Clamp mounting offers the following advantages:
Optimum heat transfer between capacitor base and board due to pressure contact
High vibration resistance
Electrically insulated material
Dimensional drawing
1) Length depends on application.
2) The screws have to be tightened uniformly and crosswise until the fixing part rests flatly on the
board.
3) Tubular rivets included in delivery package.
Dimensions and ordering codes
Capacitor
diameter d
N
65 mm
75 mm
90 mm
d
1
±0.2
mm
87
99
112
b
mm
104
116
130
Ordering code
B44030A0165B000
B44030A0175B000
B44030A0190B000
Screws are not included in the delivery package.
Please read
Cautions and warnings
and
Important notes
at the end of this document.
Page 7 of 14
EPCOS [ EPCOS ]
