B41112
Standard series
85
°C
Mounting instructions
Soldering
Recommended conditions
For reflow, use thermal conduction systems such as infrared radiation (IR) or hot blast. Vapor
heat transfer systems (VPS) are not recommended.
Observe proper soldering conditions (temperature, time, etc.).
Do not exceed the specified limits.
Temperature measuring method: Measure temperature in assuming quantitative production, by
sticking the thermo-couple to the capacitor upper part with epoxy adhesives.
Consult us for additional reflow restrictions.
Lead-free reflow
d (mm)
Peak temperature
Time in peak temperature
Time in 200
°C
or more
Time of reflow
4 ... 6.3
250
°C
5s
60 s
1 time
8 ... 10
235
°C
5s
60 s
1 time
Please read
Cautions and warnings
and
Important notes
at the end of this document.
Page 12 of 17
EPCOS [ EPCOS ]
