EN29F010
SWITCHING WAVEFORMS (continued)
Figure 10. Alternate /CE Controlled Write Operation Timings
Notes:
1. PA is address of the memory location to be programmed.
2. PD is data to be programmed at byte address.
3. /DQ7 is the output of the complement of the data written to the device.
4.
DOUT is the output of data written to the device.
5. Figure indicates last two bus cycles of four bus cycle sequence.
This Data Sheet may be revised by subsequent versions
or modifications due to changes in technical specifications.
©2003 Eon Silicon Solution, Inc., www.essi.com.tw
30
Rev. A, Issue Date: 2003/10/20