EM4006
Ordering Information
Die Form
This chart shows general offering; for detailed Part Number to order, please see the table “Standard Versions” below.
F9 WS 11 %%%
EM4006
-
Version:
Customer Version:
F9 = Miller, 512 clocks per bit
%%% = only for custom specific version
Die form:
Bumping:
WW = Wafer
" " (blank) = no bumps
E = with Gold Bumps
WS = Sawn Wafer/Frame
WT = Sticky Tape
WP = Waffle Pack (note 1)
Thickness:
7 = 7 mils (178um)
11 = 11 mils (280um)
21 = 21 mils (533um)
Packaged Devices
This chart shows general offering; for detailed Part Number to order, please see the table “Standard Versions” below.
F9 CI2L C %%%
EM4006
-
Version:
Customer Version:
F9 = Miller, 512 clocks per bit
%%% = only for custom specific version
Package:
Delivery Form:
B = Tape
C = Bulk
CI2L = CID Pack, 2 pins (length 2.5mm)
CB2R = PCB Package, 2 pins
Remarks:
•
•
For ordering please use table of “Standard Version” table below.
For specifications of Delivery Form, including gold bumps, tape and bulk, as well as possible other delivery form or
packages, please contact EM Microelectronic-Marin S.A.
•
Note 1: This is a non-standard package. Please contact EM Microelectronic-Marin S.A for availability.
Standard Versions:
The versions below are considered standards and should be readily available. For other versions or other delivery form,
please contact EM Microelectronic-Marin S.A. Please make sure to give complete part number when ordering (without
space between letters).
Bit
coding
Cycle/
bit
Delivery
Form /
For EM internal use
only
Part Number
Package/Die Form
old version
OPS#
2878
2930
3669
Bumping
EM4006 F9 CB2RC
EM4006 F9 CI2LC
EM4006 F9 WP7
Miller
Miller
Miller
Miller
512 PCB Package, 2 pins
bulk
501
501
512 CID package, 2 pins (length 2.5mm) bulk
512 Die in waffle pack, 7 mils
512 custom
no bumps
custom
501
EM4006 F9 YYY-%%%
%%%
Product Support
Check our Web Site under Products/RF Identification section.
Questions can be sent to cid@emmicroelectronic.com
EM Microelectronic-Marin SA cannot assume responsibility for use of any circuitry described other than circuitry
entirely embodied in an EM Microelectronic-Marin SA product. EM Microelectronic-Marin SA reserves the right to
change the circuitry and specifications without notice at any time. You are strongly urged to ensure that the
information given has not been superseded by a more up-to-date version.
© EM Microelectronic-Marin SA, 01/02, Rev. C/404
10
www.emmicroelectronic.com
Copyright 2001, EM Microelectronic-Marin SA