Medallion 6000 Series 1550 nm
Externally-Modulated Transmitter
DATASHEET | OCTOBER 2013
FIBER OPTICS
General and Mechanical Specifications
(continued)
Property
Front Panel RF Gain / OMI Adjustment Range
CATV Frequency Range
CATV Flatness
CATV Flatness – N-Type
CATV Input impedance
CATV Input Return Loss
CATV Front Panel RF Tap
CATV Front Panel RF Tap Flatness
SAT-IF Frequency Range
SAT-IF Flatness
SAT-IF Input impedance
SAT-IF Input Return Loss
SAT-IF Front Panel RF Tap
SAT-IF Front Panel RF Tap Flatness
Requirement
+2 / -4 dB from nominal setting
45 MHz – 1003 MHz
+/- 0.50 dB
+/- 0.75 dB
+/- 0.75 dB
75
Ω
16 dB min
-20 +/- 1 dB down from RF input
+/- 1 dB
950 MHz – 2800 MHz
+/- 2 dB
75
Ω
10 dB min
7 +/- 2.5 dBmV/Ch at 1% OMI/ch
+/- 1 dB
Comments
CATV Performance can vary slightly
45 MHz – 550 MHz
45 MHz – 1003 MHz
45 MHz – 1003 MHz N-Type
45 MHz – 1003 MHz
45 MHz – 1003 MHz
950 MHz – 2800 MHz
950 MHz – 2800 MHz
Test/Link Configuration
Property
L-Type
D-Type
S-Type
F-Type
N-Type
15 dBm
None
16 dBm
21 dBm
13 dBm
EDFA
25 Km
40 Km
65 Km
20 Km
40 Km
Link
1
Received Power
2
0.0 dBm at the receiver
0.0 dBm at the receiver
0.0 dBm at the receiver
-5.5 dBm at the receiver
0.0 dBm at the receiver
| REV 2013.10
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
EMCORE [ EMCORE CORPORATION ]
