EDS6416AHTA-TI
Write command to Precharge command interval (same bank)
When the precharge command is executed for the same bank as the write command that preceded it, the minimum
interval between the two commands is 1 clock. However, if the burst write operation is unfinished, the input data
must be masked by means of UDQM and LDQM for assurance of the clock defined by tDPL.
CLK
PRE/PALL
WRIT
in A0
Command
UDQM
LDQM
DQ
in A1
in A2
tDPL
WRITE to PRECHARGE Command Interval (same bank) (BL = 4 (To stop write operation))
CLK
PRE/PALL
Command
WRIT
in A0
UDQM
LDQM
DQ
in A1
in A2
in A3
tDPL
WRITE to PRECHARGE Command Interval (same bank) (BL = 4 (To write all data))
Preliminary Data Sheet E0636E10 (Ver.1.0)
36
ELPIDA [ ELPIDA MEMORY ]
