EBE51RC4AAFA
VDD (power supply pins)
1.8V is applied. (VDD is for the internal circuit.)
VDDSPD (power supply pin)
1.8V is applied (For serial EEPROM).
VSS (power supply pin)
Ground is connected.
/RESET(input pin)
LVCMOS reset input. When /RESET is Low, all registers are reset.
Detailed Operation Part and Timing Waveforms
Refer to the EDE2504AASE, EDE2508AASE, EDE2516AASE datasheet (E0427E). DM pins of component device
fixed to VSS level on the module board. DIMM /CAS latency = component CL + 1 for registered type.
Preliminary Data Sheet E0471E11 (Ver. 1.1)
19