欢迎访问ic37.com |
会员登录 免费注册
发布采购

EBD26UC6AKSA-7A-E 参数 Datasheet PDF下载

EBD26UC6AKSA-7A-E图片预览
型号: EBD26UC6AKSA-7A-E
PDF下载: 下载PDF文件 查看货源
内容描述: 256MB DDR SDRAM SO-DIMM内存( 32M字× 64位, 2级) [256MB DDR SDRAM SO-DIMM (32M words x 64 bits, 2 Ranks)]
分类和应用: 存储内存集成电路动态存储器双倍数据速率时钟
文件页数/大小: 19 页 / 210 K
品牌: ELPIDA [ ELPIDA MEMORY ]
 浏览型号EBD26UC6AKSA-7A-E的Datasheet PDF文件第2页浏览型号EBD26UC6AKSA-7A-E的Datasheet PDF文件第3页浏览型号EBD26UC6AKSA-7A-E的Datasheet PDF文件第4页浏览型号EBD26UC6AKSA-7A-E的Datasheet PDF文件第5页浏览型号EBD26UC6AKSA-7A-E的Datasheet PDF文件第6页浏览型号EBD26UC6AKSA-7A-E的Datasheet PDF文件第7页浏览型号EBD26UC6AKSA-7A-E的Datasheet PDF文件第8页浏览型号EBD26UC6AKSA-7A-E的Datasheet PDF文件第9页  
PRELIMINARY DATA SHEET  
256MB DDR SDRAM SO-DIMM  
EBD26UC6AKSA-E (32M words × 64 bits, 2 Ranks)  
Description  
Features  
The EBD26UC6AKSA is 32M words × 64 bits, 2 ranks  
Double Data Rate (DDR) SDRAM Small Outline Dual  
In-line Memory Module, mounting 8 pieces of 256M  
bits DDR SDRAM sealed in TSOP package. Read and  
write operations are performed at the cross points of  
the CK and the /CK. This high-speed data transfer is  
realized by the 2 bits prefetch-pipelined architecture.  
Data strobe (DQS) both for read and write are available  
for high speed and reliable data bus design. By setting  
extended mode register, the on-chip Delay Locked  
Loop (DLL) can be set enable or disable. This module  
provides high density mounting without utilizing surface  
mount technology. Decoupling capacitors are mounted  
beside each TSOP on the module board.  
200-pin socket type small outline dual in line memory  
module (SO-DIMM)  
PCB height: 31.75mm  
Lead pitch: 0.6mm  
Lead-free  
2.5V power supply  
Data rate: 333Mbps/266Mbps (max.)  
2.5 V (SSTL_2 compatible) I/O  
Double Data Rate architecture; two data transfers per  
clock cycle  
Bi-directional, data strobe (DQS) is transmitted  
/received with data, to be used in capturing data at  
the receiver  
Data inputs, outputs and DM are synchronized with  
DQS  
4 internal banks for concurrent operation  
(Components)  
DQS is edge aligned with data for READs; center  
aligned with data for WRITEs  
Differential clock inputs (CK and /CK)  
DLL aligns DQ and DQS transitions with CK  
transitions  
Commands entered on each positive CK edge; data  
referenced to both edges of DQS  
Data mask (DM) for write data  
Auto precharge option for each burst access  
Programmable burst length: 2, 4, 8  
Programmable /CAS latency (CL): 2, 2.5  
Refresh cycles: (8192 refresh cycles /64ms)  
7.8µs maximum average periodic refresh interval  
2 variations of refresh  
Auto refresh  
Self refresh  
Document No. E0605E10 (Ver. 1.0)  
Date Published November 2004 (K) Japan  
URL: http://www.elpida.com  
Elpida Memory , Inc. 2004