PRELIMINARY DATA SHEET
1GB Unbuffered DDR SDRAM DIMM
EBD11UD8ABFB (128M words × 64 bits, 2 Banks)
Description
Features
The EBD11UD8ABFB is 128M words × 64 bits, 2
• 184-pin socket type dual in line memory module
(DIMM)
banks Double Data Rate (DDR) SDRAM unbuffered
module, mounted 16 pieces of 512M bits DDR SDRAM
sealed in TSOP package. Read and write operations
are performed at the cross points of the CK and the
/CK. This high-speed data transfer is realized by the 2
bits prefetch-pipelined architecture. Data strobe (DQS)
both for read and write are available for high speed and
reliable data bus design. By setting extended mode
register, the on-chip Delay Locked Loop (DLL) can be
set enable or disable. This module provides high
density mounting without utilizing surface mount
PCB height: 31.75mm
Lead pitch: 1.27mm
• 2.5V power supply
• Data rate: 333Mbps/266Mbps (max.)
• 2.5 V (SSTL_2 compatible) I/O
• Double Data Rate architecture; two data transfers per
clock cycle
• Bi-directional, data strobe (DQS) is transmitted
/received with data, to be used in capturing data at
the receiver
technology.
Decoupling capacitors are mounted
beside each TSOP on the module board.
• Data inputs and outputs are synchronized with DQS
• 4 internal banks for concurrent operation
(Component)
• DQS is edge aligned with data for READs; center
aligned with data for WRITEs
• Differential clock inputs (CK and /CK)
• DLL aligns DQ and DQS transitions with CK
transitions
• Commands entered on each positive CK edge; data
referenced to both edges of DQS
• Auto precharge option for each burst access
• Programmable burst length: 2, 4, 8
• Programmable /CAS latency (CL): 2, 2.5
• Refresh cycles: (8192 refresh cycles /64ms)
7.8µs maximum average periodic refresh interval
• 2 variations of refresh
Auto refresh
Self refresh
Document No. E0296E20 (Ver. 2.0)
Date Published August 2002 (K) Japan
URL: http://www.elpida.com
Elpida Memory , Inc. 2002
ELPIDA [ ELPIDA MEMORY ]
