ELM711
Absolute Maximum Ratings
Storage Temperature....................... -65°C to +150°C
Note:
Stresses beyond those listed here will likely damage
the device. These values are given as a design
guideline only. The ability to operate to these levels
is neither inferred nor recommended.
Ambient Temperature with
Power Applied....................................-40°C to +85°C
Voltage on VDD with respect to VSS............0 to +7.0V
Voltage on any other pin with
respect to VSS........................... -0.6V to (VDD + 0.6V)
Electrical Characteristics
All values are for operation at 25°C and a 5V supply, unless otherwise noted. For further information, refer to note 1 below.
Characteristic
Minimum Typical
Maximum Units
Conditions
Supply Voltage, VDD
VDD rate of rise
3.0
5.0
5.5
V
see note 2
see note 3
0.05
V/ms
mA
Average Supply Current, IDD
0.8
1.4
Output low voltage
0.3
4.2
60
V
V
current (sink) = 10 mA
Output high voltage
current (source) = 10 mA
PB input debounce time
PB input pullup resistance
msec
KW
see note 4
400
Notes:
1. This integrated circuit is produced using one of the Microchip Technology Inc.’s PIC12C5XX products as the
core embedded microcontroller. For further device specifications, and possibly clarification of those given,
please refer to the appropriate Microchip documentation.
2. This spec must be met in order to ensure that a correct power on reset occurs. It is quite easily achieved
using most common types of supplies, but may be violated if one uses a slowly varying supply voltage, as
may be obtained through direct connection to solar cells, or some charge pump circuits.
3. Device only. Does not include any current supplied to external circuits.
4. This is typical – the value varies with temperature and voltage.
ELM711DSA
Elm Electronics – Circuits for the Hobbyist
3 of 7
< http://www.elmelectronics.com/ >
ELM [ ELM ELECTRONICS ]
