ELM460
Electrical Characteristics
All values are for operation at 25°C and a 5V supply, unless otherwise noted. For further information, refer to note 1 below.
Characteristic
Minimum Typical
Maximum Units
Conditions
Supply Voltage, VDD
VDD rate of rise
3.0
5.0
5.5
V
V/ms
mA
V
see note 2
0.05
Average Supply Current, IDD
Input low voltage
1.0
2.4
0.15 VDD
VDD
VSS
Input high voltage
Output low voltage
Output high voltage
Output Pulse Period
0.85 VDD
V
0.6
V
Current (sink) = 8.7mA
Current (source) = 5.4mA
see note 3
VDD - 0.7
V
50
msec
Notes:
1. This integrated circuit is produced with a Microchip Technology Inc.’s PIC12C5XX as the core embedded
microcontroller. For further device specifications, and possibly clarification of those given, please refer to the
appropriate Microchip documentation.
2. This spec must be met in order to ensure that a correct power on reset occurs. It is quite easily achieved
using most common types of supplies, but may be violated if one uses a slowly varying supply voltage, as
may be obtained through direct connection to solar cells, or some charge pump circuits.
3. Pulse timing is affected by supply and temperature variations as shown in Figure 1 below. Results shown
are average values that can be expected.
-6
fast
-4
-2
0
% Error
slow
+2
+4
+6
VDD = 5V
VDD = 3V
-40
0
40
80
Temperature (°C)
Figure 1. Average Timing Error
3 of 4
ELM460DSB
Elm Electronics – Circuits for the Hobbyist
< http://www.elmelectronics.com/ >