EL2420C
EL2420C
Quad, Low Cost, Gain of 1, Video Op Amp
Features
•
•
•
•
•
•
Optimized for 5V operation
Stable at gain of 1
50 MHz Gain bandwidth product
130 V/µs slew rate
Drives 150Ω load to video levels
Input and outputs operate at
negative supply rail
•
-60 dB isolation at 4.2 MHz
General Description
The EL2420C operational amplifier, built using Elantec’s comple-
mentary bipolar process, offers unprecedented high frequency
performance at a very low cost. It is suitable for any application, such
as consumer video, where traditional DC performance specifications
are of secondary importance to the high frequency specifications. On a
5V supply at a gain of +1 the EL2420C will drive a 150Ω load to +2V,
with a bandwidth of 50 MHz. This device achieves 0.1 dB bandwidth
at 5 MHz.
The recommended power supply voltage is 5V. At zero and 5V sup-
plies, the inputs will operate to ground. When the outputs are at 0V the
amplifier draws only 2.4 mA of supply current.
Applications
•
•
•
•
Consumer video amplifier
Active filters/integrators
Cost sensitive applications
Single supply amplifiers
Ordering Information
Part No
EL2420CN
EL2420CS
Temp. Range
-40°C to +85°C
-40°C to +85°C
Package
14-Lead P-DIP
14-Lead SO
Outline #
MDP0031
MDP0027
Connection Diagram
P-DIP, SO
April 1998 Rev B
Note:
All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 1997 Elantec, Inc.
ELANTEC [ ELANTEC SEMICONDUCTOR ]
