E13C2 Series
• 3.3V supply voltage
E13C2
• PECL Output Oscillators
• 6 pad ceramic SMD package with J-leads
• Stability to 20ppm
• Output Enable/Disable available
• Complementary Output available
• Available on Tape and Reel
H
5.1
L 14.2
9.85
W
OSCILLATOR
NOTES
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
OBSOLETE
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range
19.440MHz to 212.500MHz
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
Input Current
3.3VDC 5ꢀ
75mA Maximum
Logic Type
100KH
Frequency Tolerance / Stability
Inclusive of Operating Temp Range, Supply Voltage,
Load, and Aging @25°C over 10 years
100ppm, 50ppm, 25ppm, or
20ppm Maximum
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
VCC-1.025VDC Minimum
VCC-1.620VDC Maximum
2 nSeconds Maximum
50 10(ꢀ)
20ꢀ to 80ꢀ of waveform
at 50ꢀ of waveform
Duty Cycle
50 5(ꢀ)
Load Drive Capability
50 Ohms into VCC-2.0VDC
No Connect, Enable/Disable,
Complementary Output, or
Complementary Output and Enable/Disable
Enables Output
Logic Control / Additional Output
Enable/Disable Input Voltage
VIL of VCC-1.475VDC Maximum
No Connection
Enables Output
VIH of VCC-1.165VDC Minimum
Disables Output: Logic Low
Disables Complementary Output: Logic High
10 mSeconds Maximum
1 pSec Maximum
Start Up Time
RMS Phase Jitter
FJ = 12kHz to 20MHz
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
10/02
ECLIPTEK CORP.
OSCILLATOR
E13C2
CERAMIC
3.3V
OS64
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
158
ECLIPTEK [ Ecliptek ]
