17JE Series
Unit : mm
List of Straight Type Deviations
(Shows combinations of ground tab/spacers and stud/jack sockets).
* “Equipped with” as used here means that connector has an accessory built in.
“Bundled (not built in)” as used here means that connector is supplied with an accessory not built in but bundled with it
17JE-13□□0-37-FA
17JE-23□□0-37-FA
17J-011-FA Board Lock
57D-149-6A
Spacer
Designations of
Ground Tab and Spacer
φ3.3
Stud
ꢀ ꢀ
ꢀ
Jack Socket
Designation
With locking device and
pan head screw and
17L-002□
Type1
Type not fastened to
panel from both sides
17L-002□
17JE-13□□0-37(D2□)-FA
Ｇ
Equipped With M3 hexagon With M3 hexagon nut and
nut and 17L-003□1 17L-003□1
17JE-13□□0-37(D3□)-FA 17JE-13□□0-37(D23□)-FA
Type2
17L-003□1
17JE
Type not fastened to
panel from both sides
M3
Equipped With M3
hexagon nut and
17L-003□2-CF
17L-003□2-CF
17JE-13□□0-37(D28□)-CA
M3
Equipped With M3
hexagon nut and
17L-003□4-CF
17L-003□4-CF
17JE-13□□0-37(D16□)-CA
M3
Type3
17L-003□3
With Jack Sockets and
hexagon nut 17L-003□3
17JE-13□□0-37(D4□)-FA
Type fastened to
panel from both sides
(panel thickness : 1.3
max.)
-
Equipped With M3 hexa
gon nut and 17L-003□3
17JE-13□□0-37(D31□)-FA
M3
With Jack Sockets and
17L-003□3
17JE-13□□0-37(D36□)-FA
17L-003□6-CF
Equipped With M3
hexagon nut and
17L-003□6-CF
17JE-13□□0-37(D71□)-CA
With Jack Sockets and
17L-003□6-CF
M3
17JE-13□□0-37(D30□)-CA
□stands for type of engaging
screw.
Ａ :M2.6×0.45(Standard)
Ｂ :M3×0.5
Ｃ :#4-40UNC
is recommended.
Stands for on combination.
9
●ꢀ ●
DDK [ DDK LTD. ]
