XBee®/XBee‐PRO® ZB SMT RF Modules
Node Identification Indicator
Frame Type: 0x95
This frame is received when a module transmits a node identification message to identify itself (when AO=0).
The data portion of this frame is similar to a network discovery response frame (see ND command).
Frame Fields
Start Delimiter
Length
Offset Example
0 0x7E
Description
MSB 1 0x00
LSB 2 0x20
3 0x95
Number of bytes between the length and the checksum
Frame Type
MSB 4 0x00
5 0x13
6 0xA2
64-bit Source
Address
7 0x00
64-bit address of sender
16-bit address of sender.
8 0x40
9 0x52
10 0x2B
LSB 11 0xAA
MSB 12 0x7D
LSB 13 0x84
16-bit Source
Network Address
Frame-specific Data
0x01 - Packet Acknowledged
0x02 - Packet was a broadcast packet
Receive Options
14 0x02
15 0x7D
16 0x84
17 0x00
18 0x13
19 0xA2
20 0x00
21 0x40
22 0x52
23 0x2B
24 0xAA
25 0x20
26 0x00
27 0xFF
28 0xFE
Source 16-bit
address
Set to the 16-bit network address of the remote. Set to
0xFFFE if unknown.
A
P
I
P
a
c
k
e
t
64-bit Network
address
Indicates the 64-bit address of the remote module that
transmitted the node identification frame.
NI String
Node identifier string on the remote device. The NI-String
is terminated with a NULL byte (0x00).
Parent 16-bit
address
Indicates the 16-bit address of the remote's parent or
0xFFFE if the remote has no parent.
0 = Coordinator
1 = Router
Device Type
29 0x01
2 = End Device
1 = Frame sent by node identification pushbutton event
(see D0 command)
2 = Frame sent after joining event occurred (see JN
command).
Source Event
30 0x01
3 = Frame sent after power cycle event occurred (see JN
command).
31 0xC1
32 0x05
33 0x10
34 0x1E
35 0x1B
Digi Profile ID
Set to Digi's application profile ID.
Manufacturer ID
Set to Digi's Manufacturer ID.
Checksum
0xFF - the 8 bit sum of bytes from offset 3 to this byte.
Example: If the commissioning push button is pressed on a remote router device with 64-bit address
0x0013A200 40522BAA, 16-bit address 0x7D84, and default NI string, the following node identification
indicator would be received.
© 2010 Digi International, Inc.
114
DCD [ DIGITAL CORE DESIGN ]
