DR805x Instructions set details
- 45 -
3.21. JZ
Instruction:
Function:
JZ rel
Jump if accumulator is zero
Description: If all bits of the accumulator are zero, branch to the address indicated;
otherwise proceed with the next instruction. The branch destination is
computed by adding the signed relative-displacement in the second
instruction byte to the PC, after incrementing the PC twice. The
accumulator is not modified. No flags are affected.
Operation:
(PC) ← (PC) + 2
if (A) = 0 then
(PC) ← (PC) + rel
Bytes:
Cycles:
2
3
Encoding:
0
1
1
0
0
0
0
0
relative address
All trademarks mentioned in this document
are trademarks of their respective owners.
http://www.DigitalCoreDesign.com
http://www.dcd.pl
Copyright 1999-2003 DCD – Digital Core Design. All Rights Reserved.