BriLux
1W Batwing Emitter
BTP-87XXCG-XX-X/X
Absolute Maximum Ratings at T
J
=25ºC
Parameter
Red/Amber/Yellow
White/Blue/Green
Power Dissipation (W)
DC Forward Current (mA)
[1]
Peak Pulsed Forward Current (mA)
[4]
Average Forward Current (mA)
Reverse Voltage (V)
Reverse Current (uA)
ESD Sensitivity (V)
[2]
LED Junction Temperature at 350mA (°C)
[3]
Thermal Resistance Junction to Board (°C/W)
Temperature Coefficient of V
F
(mV/°C)
Storage Temperature (°C)
Operating Temperature (°C)
Lead Soldering Temperature (°C)
[4]
0.77
350
1000
350
5
50
2,000
125
15
-2
-40 to +120
-30 to +110
1.22
350
1000
350
5
50
2,000
125
15
-2
-40 to +120
-30 to +110
240°C for 5 seconds max 240°C for 5 seconds max
Application Notes:
1.
2.
3.
4.
5.
Proper forward current must be observed to maintain the junction temperature below maximum
rating
Although all products listed are class one ESD protection (+/- 2KV by HBM mode), care must be
fully taken when handling products
Specification is subjected to change for improvements without notice.
Test conditions: tp≤10us, duty cycle = 0.005
CAUTION: When lighting up, the emitter will become very hot if it is not attached to a heat sink.
Please provide proper heat management to prevent damage to the emitter.
Part No.: BTP-87XXCG-XX-X/X
Page 2 of 6
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
DBLECTRO [ DB LECTRO INC ]
