October 19, 2005
SMD INDUCTOR DR78098
Features
Low Profile Surface Mount Design
Flat Top for Pick and Place
Tape & Reel Packing Available
Materials meet UL94V-0
Operating Temp. -40°C to +130°C
(see note below)
ELECTRICAL SPECIFICATIONS AT 25ºC
PART No.
DR335-333
INDUCTANCE (µH)
33
±
10%
@ 2.52MHz
DCR
(Ω) Max.
0.14
RATED CURRENT
(A) Max.
1.20
Note:
1.
2.
Full rated current is based on an ambient operating temperature of 85ºC with a 45ºC maximum temperature rise in free air.
All materials are rated at 155ºC or higher.
The DR78098 will be marked DR335-333 or 333 on the part. DR335-333 will be on the packaging.
MECHANICAL OUTLINES
7.70±0.3
[0.303]
5.00
[0.197]
1.80
[0.071]
7.90
[0.311]
1.60
[0.063]
1
7.00±0.3
[0.276]
4.80
[0.189]
7.20
[0.283]
DR335
TOP VIEW
SIDE VIEW
BOTTOM VIEW
2
PCB SOLDER PAD LAYOUT (REF.)
SCHEMATIC
NOTES:
1. ALL DIMENSIONS ARE SHOWN IN MILLIMETER “mm”[INCHES “IN”].
2. GENERAL TOLERANCE
±0.25mm[0.010
IN.], UNLESS OTHER SPECIFIED.
DATATRONIC:
28151Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701
Email: ddisales@datatronics.com
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specification are subject to change without notice.
DATATRONICS [ DATATRONIC DISTRIBUTION, INC. ]
