DS1044
4-in-1 High-Speed Silicon Delay Line
www.dalsemi.com
FEATURES
All-silicon timing circuit
Four independent buffered delays
Initial delay tolerance
±1.5
ns
Stable and precise over temperature and
voltage
Leading and trailing edge precision preserves
the input symmetry
Standard 14-pin DIP, 14-pin SOIC (150-mil)
Vapor phase, IR and wave solderable
Available in Tape and Reel
PIN ASSIGNMENT
IN1
NC
IN2
IN3
IN4
NC
GND
1
2
3
4
5
6
7
14
13
12
11
10
9
8
V
CC
NC
OUT1
NC
OUT2
OUT3
OUT4
DS1044 14-Pin DIP
DS1044R 14-Pin SOIC (150-mil)
See Mech. Drawings Section
PIN DESCRIPTION
IN1-IN4
OUT1-OUT4
NC
V
CC
GND
- Input Signals
- Output Signals
- No Connection
- +5-Volt Supply
- Ground
DESCRIPTION
The DS1044 series is a 4-in-1 version of the low-power, +5 volt, high speed DS1035.
The DS1044 series of delay lines have four independent logic buffered delays in a single package. The
device is Dallas Semiconductor’s fastest 4-in-1 delay line. It is available in a standard 14-pin DIP and
14-pin SOIC.
The device features precise leading and trailing edge accuracies. It has the inherent reliability of an
all-silicon delay line solution. The DS1044’s nominal tolerance is ±1.5 ns and an additional tolerance
over temperature and voltage of ±1.0 ns for the faster delays. Each output is capable of driving up to 10
LS loads.
Standard delay values are indicated in Table 1.
(972) 371-4348 for further information.
Customers may contact Dallas Semiconductor at
1 of 6
111899