DS1040
NOTES:
1. All voltages are referenced to ground.
2. Measured with outputs open, minimum period.
3. V
CC
= 5V @ 25°C. Width accurate to within
±2
ns or 5%.
4. Temperature variations between 0°C and 70°C may increase or decrease width by an additional
±1
ns
or
±3%,
whichever is greater.
5. For DS1040 pulse generators with maximum widths less than 50 ns, temperature variations between
0°C and 70°C may increase or decrease width by
±1
ns or
±9%,
whichever is greater.
6. I
CC
is a function of frequency and maximum width. Only a pulse generator operating with 40 ns
period and V
CC
=5.25V will have an I
CC
=75 mA. For example, a -100 will never exceed 30 mA, etc.
7. See “Test Conditions” sections at the end of this data sheet.
TIMING DIAGRAM
Figure 2
4 of 6
DALLAS [ DALLAS SEMICONDUCTOR ]
