DS1040
NOTES:
1. All voltages are referenced to ground.
2. Measured with outputs open, minimum period.
3. VCC = 5V @ 25°C. Width accurate to within ±2 ns or 5%.
4. Temperature variations between 0°C and 70°C may increase or decrease width by an additional ±1 ns
or ±3%, whichever is greater.
5. For DS1040 pulse generators with maximum widths less than 50 ns, temperature variations between
0°C and 70°C may increase or decrease width by ±1 ns or ±9%, whichever is greater.
6. ICC is a function of frequency and maximum width. Only a pulse generator operating with 40 ns
period and VCC =5.25V will have an ICC =75 mA. For example, a -100 will never exceed 30 mA, etc.
7. See “Test Conditions” sections at the end of this data sheet.
TIMING DIAGRAM Figure 2
4 of 6
DALLAS [ DALLAS SEMICONDUCTOR ]
