DS1033
3-in-1 Low Voltage Silicon Delay Line
www.dalsemi.com
FEATURES
All-silicon timing circuit
Three independent buffered delays
Initial delay tolerance
±1.5
ns
Stable and precise over temperature and
voltage
Leading and trailing edge precision preserves
the input symmetry
Standard 8-pin DIP, 8-pin SOIC
Vapor phasing, IR and wave solderable
Available in Tape and Reel
PIN ASSIGNMENT
IN1
IN2
IN3
GND
1
2
3
4
8
7
6
5
V
CC
OUT1
OUT2
OUT3
DS1033M 8-Pin DIP
See Mech. Drawings Section
IN1
IN2
IN3
GND
1
2
3
4
8
7
6
5
V
CC
OUT1
OUT2
OUT3
DS1033Z 8-Pin SOIC (150-mil)
See Mech. Drawings Section
PIN DESCRIPTION
IN1-IN3
OUT1-OUT3
NC
V
CC
GND
(Sub)
- Input Signals
- Output Signals
- No Connection
- Supply Voltage
- Ground
- Internal substrate
connection, do not make
any external connections
to these pins
DESCRIPTION
The DS1033 series is a low-power +3.3 Volt version of the DS1035. It is characterized for operation
over the range of 2.7V to 3.6V.
The DS1033 series of delay lines have three independent logic buffered delays in a single package. It is
available in a standard 8-pin DIP, 150-mil 8-pin mini-SOIC.
The device features precise leading and trailing edge accuracies. It has the inherent reliability of an all-
silicon delay line solution. The DS1033’s nominal tolerance is
±1.5
ns and an additional tolerance over
temperature and voltage of
±1.0
ns for the faster delays. Detailed specifications are shown in Table 1.
Standard delay values are indicated in Table 1. Customers may contact Dallas Semiconductor at (972)
371-4348 for further information.
1 of 6
111799
DALLAS [ DALLAS SEMICONDUCTOR ]
