DS1033Z-010 参数 Datasheet PDF下载

DS1033

TEST SETUP DESCRIPTION

Figure 2 illustrates the hardware configuration used for measuring the timing parameters of the DS1033.

The input waveform is produced by a precision pulse generator under software control. Time delays are

measured by a time interval counter (20 ps resolution ) connected to the output. The DS1033 output taps

are selected and connected to the interval counter by a VHF switch control unit. All measurements are

fully automated with each instrument controlled by the computer over an IEEE 488 bus.

DS1033 TEST CIRCUIT

Figure 2

3 of 6