DS1000
TEST CONDITIONS
INPUT:
Ambient Temperature:
Supply Voltage (V
CC
):
Input Pulse:
Source Impedance:
Rise and Fall Time:
Pulse Width:
Period:
25°C
±=3°C
5.0V
±=0.1V
High = 3.0V
±=0.1V
Low = 0.0V
±=0.1V
50 ohm Max.
3.0 ns Max. (measured between 0.6V and 2.4V)
500 ns (1
µs
for -500)
1
µs
(2
µs
for -500)
OUTPUT:
Each output is loaded with the equivalent of one 74F04 input gate. Delay is measured at the 1.5V level on
the rising and falling edge.
NOTE:
Above conditions are for test only and do not restrict the operation of the device under other data sheet
conditions.
5 of 5