ES51945(5000counts)
Dual Display/No Cap
1.2 Dual display V.S. measurement mode
The dual display default mode configuration is shown at the table below.
Main measurement mode First-display
Second-display (defaulted)
DC voltage
AC voltage
NCV mode
DC voltage
AC voltage
EF
N/A
N/A
Electrical field strength
Resistance mode
Frequency mode
Continuity Check
Diode mode
Temperature mode
DCuA mode
Resistance
Frequency
Resistance
Voltage
oC
N/A
Duty cycle
N/A
N/A
oF
N/A
DCuA
1.3 Push key operation
With dual display, user can use single push key “SEL” to active the Volts and Amps
readings simultaneously.
Push function
SEL in DCV mode
(function selection)
SEL in ACV mode
(function selection)
Hold
First-display
DC Voltage
Second-display
DCA1 Æ DCA/Zero2
See Fig.1
AC Voltage
ACA ÅÆ ACA Hz3
See Fig.2
Stop updating
Stop updating
NOTE:
1. DCA mode is not available if DIS_DCA (pin108) is pulled to V-.
2. DCA/Zero means the readings shown on LCD is offset-cancelled readings.
3. Hz mode is the frequency reading of ACA mode.
v2.3
7
10/06/25
CYRUSTEK [ Cyrustek corporation ]
