ES51945(5000counts)
Dual Display/No Cap
LCD Backplane Waveform
V- +3.1
V- +3.1
V-
V-
V- +3.1
V- +3.1
V-
V-
V- +3.1
V- +3.1
V-
V- +3.1
V-
V- +3.1
V-
3.5. LCD display on condition
LCD Annunciator
Condition
V
A
Ω
In voltage measurement mode, and diode measurement mode.
In current measurement mode.
In resistance measurement mode, and continuity mode.
In continuity check mode.
In diode mode.
%
Hz
Hz2
In duty cycle measurement.
Hz for Frequency mode (voltage signal to FREQ input)
Hz for ACA mode (ADP/IVSH/IVSL)
DC
In DC voltage or current mode.
AC
In AC voltage or current mode.
AUTO
MANU
HOLD
m2
When automatic range selection is enabled. (Voltage, resistance, frequency mode)
In manual mode.
When HOLD function is enabled.
In voltage measurement mode and the full scale range is in the order of 10-3.
In DCuA current measurement mode and the full scale range is in the order of uA.
µ2
M
K
In resistance measurement mode and the full scale range is in the order of MΩ
In resistance measurement mode and the full scale range is in the order of KΩ
When the reading is exceeding 30V or OL in DCV or ACV, the HV warning symbol
will be displayed.
℃
In temperature measurement mode and when the unit is ℃
℉
In temperature measurement mode and when the unit is ℉
When voltage (ref. to V-) of LBAT9 pin is less than Vt1, SLB3 will disappear.
When voltage (ref. to Vo) of LBAT9 pin is less than Vt2, SLB2 will disappear.
When SLB2 disappears for 8 seconds, SLB1 will be blinking.
When auto power off function is enabled.
SLB3
SLB2
SLB1
APO
v2.3
24
10/06/25
CYRUSTEK [ Cyrustek corporation ]
