ES51950(5000counts)
Dual Display/Cap
Features
•
5000 counts dual LCD display
•
128L QFP package
•
3V DC power supply
•
ADC Conversion rate : 3.3 times/s
•
Full automatic measurement
*Voltage measurement: 500.0mV – 1000V
*Current measurement: 50.00A/500.0A,
500A/5000A
*Flame rod DCuA mode measurement:
500.0uA/5000uA both manual ranges
*Smart auto check for R/S/D/C mode
Resistance: 500.0Ω~5.000MΩ
Capacitance: 5.000nF~500.0uF
(Taiwan
patent no.: 326361)
*Not contact AC electric field detection
*Frequency mode active on sub-display for ACA
500.0Hz ~ 5000Hz
*Resistance measurement: 500.0Ω – 50.00MΩ
*Capacitance measurement:
5.000nF – 50.00mF
(Taiwan
patent no.: 323347, 453443)
*Frequency counter with duty cycle display:
500.0Hz – 50.00MHz
5% – 95% (< 10kHz)
•
ZERO function for DCA mode
•
Voltage high crest factor detection
(Taiwan
patent no.: 234661)
•
Voltage & Current measured simultaneously
ACV+ACA, DCV+DCA
•
Diode measurement & continuity check
•
Auto range temperature mode(500.0
0
C /5000
0
C)
•
Temperature mode with internal scale translation
circuit from
0
C to
0
F
•
Push functions:
*Single Select key operation:
Zero for DCA
Hz for ACA
*Range change function
v2.3
1
10/06/25
*Data hold function
*Back light function
*Semi-auto Calibration Operation
(Taiwan
patent no.: 367334)
•
Low pass filter for ACA measurement
•
Band-gap reference voltage output
•
CE selection (DC/AC 1010V, DC/AC 610V)
•
LCD segment check when power on
•
Auto power off (30min/15min)
•
Sleep state indicative signal output
•
Re-power on
•
On-chip buzzer driver
•
High Voltage (HV) danger indication
•
Low battery multi-level detection
Description
ES51950 is an integrated analog-to-digital
converter (ADC) with dual 5,000-count LCD
display, which 4-digit main-display (AC/DC
Voltage) and 4-digit sub-display (AC/DC
Current), automatic range selection, and 3V
DC power supply. ES51950 could be
designed for a clamp-meter with V & A
measurement simultaneously. Automatic
range selection is provided for voltage
(AC/DC)
measurement,
resistance
measurement,
current
measurement,
capacitance measurement, and frequency
counter. Other features include offset
removing feature for DCA clampmeter, data
holding, duty cycle measurement, diode
measurement, temperature measurement,
continuity checking, multi-level low battery
detection, auto power off, re-power on,
backlight driver, and buzzer output driver.
CYRUSTEK [ Cyrustek corporation ]
