ES51921
22,000 Counts Auto DMM
Features
•
22,000 counts LCD driver with 46-segment
bargraph display
•
Conversion rate : 2 times/s
•
Full automatic measurement
*Voltage measurement:
Manual 220.00mV / Auto 2.2000V – 1000.0V /
Auto 220.00 – 1000.0V
*Current measurement:
μA/mA/A
*Resistance measurement:
220.00Ω – 220.00MΩ
*Capacitance measurement:
22.000nF – 220.00mF(25sec)
(Taiwan
patent no.: 323347,453443)
*Frequency counter
22.00Hz – 220.00MHz
•
Current modes for clamp meter
•
Duty cycle measurement (5.0% ~ 94.9%)
•
Diode measurement
•
Continuity check
•
ADP mode with independent reference voltage
•
Temperature mode with internal scale translation
circuit from
o
C to
o
F
•
Push functions
*Range change function
*VAHZ function
*Relative function
*Zero function in manual DCA mode
*Data
hold function with delay hold feature
*MAX/MIN function
*Back-light function
*KEY function
Ver. 3.2
1
10/06/23
•
Programmable LCD segment display
•
Support low pass filter* for AC voltage & Clamp
ACA measurement
•
SHIFT function
•
High-crest-factor signal detection
(Taiwan
patent no.: 234661)
•
Band-gap reference voltage output
•
CE selection (610V, 1010V or 1500V)
•
Serial data output (RS232 format)
•
LCD segment check when power on
•
Auto power off with idle time selection
•
Sleep output
•
Re-power on
•
On-chip buzzer driver
•
3V DC power supply
•
Low battery detection for 3V or 9V battery
Description
ES51921 is an integrated analog-to-digital
converter (ADC) with 22,000 counts LCD
display, automatic range selection, and 3V DC
power supply. Automatic range selection is
provided for voltage (AC/DC) measurement,
resistance measurement, current measurement,
capacitance measurement, and frequency
counter. Expensive and bulky mechanical
range switches are not required. Other features
include relative value display, Zero function,
data holding, maximum and minimum holding,
diode measurement, temperature measurement,
continuity checking, low battery detection,
auto power off, re-power on, and RS232 data
output.
*Note: A multimeter with filtered measurement mode is a filed US patent. To avoid the patent infringement, produce a DMM with
low pass filter mode is prohibited to export to USA. Keep pin55 floating could make the LPF mode disable.