ES51928
6000 Counts Smart DMM
The SLEEP pin asserts low (-3V) in the sleep mode, and asserts high (+3V, not 0V)
after re-power on.
1.6.3 Re-power on
After auto power-off is active, pushing any of the push function or changing the
measurement function can turn on the meter again. If the meter is re-powered on
by changing measurement function, the saved state is cleared. If the meter is
re-powered on by push functions, the chip restores the saved state and enters
HOLD mode. The LCD displays the saved value except for the auto scan mode.
Ver 2.9
11
10/06/25