CY7C68013A, CY7C68014A
CY7C68015A, CY7C68016A
EZ-USB
®
FX2LP™ USB Microcontroller
High-Speed USB Peripheral Controller
EZ-USB FX2LP™ USB Microcontroller High Speed USB Peripheral Controller
Features
■
■
■
USB 2.0 USB IF high speed certified (TID # 40460272)
Single chip integrated USB 2.0 transceiver, smart SIE, and
enhanced 8051 microprocessor
Fit, form, and function compatible with the FX2
❐
Pin compatible
❐
Object code compatible
❐
Functionally compatible (FX2LP is a superset)
Ultra low power: I
CC
No more than 85 mA in any mode
❐
Ideal for bus and battery powered applications
Software: 8051 code runs from:
❐
Internal RAM, which is downloaded through USB
❐
Internal RAM, which is loaded from EEPROM
❐
External memory device (128 pin package)
16 KB of on-chip code/data RAM
Four programmable BULK, INTERRUPT, and
ISOCHRONOUS endpoints
❐
Buffering options: Double, triple, and quad
Additional programmable (BULK/INTERRUPT) 64-byte
endpoint
8-bit or 16-bit external data interface
Smart media standard ECC generation
GPIF (general programmable interface)
❐
Enables direct connection to most parallel interfaces
❐
Programmable waveform descriptors and configuration
registers to define waveforms
❐
Supports multiple ready (RDY) inputs and Control (CTL)
outputs
Integrated, industry standard enhanced 8051
❐
48 MHz, 24 MHz, or 12 MHz CPU operation
❐
Four clocks per instruction cycle
❐
Two USARTs
❐
Three counter/timers
❐
Expanded interrupt system
❐
Two data pointers
■
■
■
■
■
3.3 V operation with 5 V tolerant inputs
Vectored USB interrupts and GPIF/FIFO interrupts
Separate data buffers for the setup and data portions of a
CONTROL transfer
Integrated I
2
C controller, runs at 100 or 400 kHz
Four integrated FIFOs
❐
Integrated glue logic and FIFOs lower system cost
❐
Automatic conversion to and from 16-bit buses
❐
Master or slave operation
❐
Uses external clock or asynchronous strobes
❐
Easy interface to ASIC and DSP ICs
Available in commercial and industrial temperature grade
(all packages except VFBGA)
■
■
■
■
■
Features (CY7C68013A/14A only)
■
CY7C68014A: Ideal for Battery Powered Applications
❐
Suspend current: 100
A
(typ)
CY7C68013A: Ideal for Non Battery Powered Applications
❐
Suspend current: 300
A
(typ)
Available in Five Pb-free Packages with Up to 40 GPIOs
❐
128-pin TQFP (40 GPIOs), 100-pin TQFP (40 GPIOs), 56-pin
QFN (24 GPIOs), 56-pin SSOP (24 GPIOs), and 56-pin
VFBGA (24 GPIOs)
■
■
■
■
■
■
Features (CY7C68015A/16A only)
■
CY7C68016A: Ideal for Battery Powered Applications
❐
Suspend current: 100
A
(typ)
CY7C68015A: Ideal for Non Battery Powered Applications
❐
Suspend current: 300
A
(typ)
Available in Pb-free 56-pin QFN Package (26 GPIOs)
Two more GPIOs than CY7C68013A/14A enabling additional
features in same footprint
■
■
■
■
Cypress Semiconductor Corporation
Document #: 38-08032 Rev. *V
•
198 Champion Court
•
San Jose
,
CA 95134-1709
•
408-943-2600
Revised February 7, 2012