欢迎访问ic37.com |
会员登录 免费注册
发布采购

BCM89359KUBG 参数 Datasheet PDF下载

BCM89359KUBG图片预览
型号: BCM89359KUBG
PDF下载: 下载PDF文件 查看货源
内容描述: [Telecom Circuit, 1-Func, PBGA194, WLBGA-194]
分类和应用: 电信电信集成电路
文件页数/大小: 156 页 / 3627 K
品牌: CYPRESS [ CYPRESS ]
 浏览型号BCM89359KUBG的Datasheet PDF文件第14页浏览型号BCM89359KUBG的Datasheet PDF文件第15页浏览型号BCM89359KUBG的Datasheet PDF文件第16页浏览型号BCM89359KUBG的Datasheet PDF文件第17页浏览型号BCM89359KUBG的Datasheet PDF文件第19页浏览型号BCM89359KUBG的Datasheet PDF文件第20页浏览型号BCM89359KUBG的Datasheet PDF文件第21页浏览型号BCM89359KUBG的Datasheet PDF文件第22页  
BCM89359 Advance Data Sheet  
Power Supplies and Power Management  
Section 2: Power Supplies and Power  
Management  
Power Supply Topology  
One Buck regulator, multiple LDO regulators, and a power management unit (PMU) are integrated into the  
BCM89359. All regulators are programmable via the PMU. These blocks simplify power supply design for  
Bluetooth and WLAN functions in embedded designs.  
A single VBAT (3.0V to 4.8V DC max) and VIO supply (1.8V or 3.3V) can be used, with all additional voltages  
being provided by the regulators in the BCM89359.  
Three control signals, BT_REG_ON, WL_REG_ON, and WPT_REG_ON (that is, WPT_1P8), are used to  
power-up the regulators and take the respective section out of reset. The CBUCK CLDO and LNLDO power up  
when any of the reset signals are deasserted and the wireless supplies (that is, WPT_1P8/WPT_3P3) are not  
available. All regulators are powered down only when both BT_REG_ON and WL_REG_ON are deasserted.  
The CLDO and LNLDO may be turned off/on based on the dynamic demands of the digital baseband.  
The BCM89359 allows for an extremely low power-consumption mode by completely shutting down the  
CBUCK, CLDO, and LNLDO regulators. When in this state, MEMLPLDO and LPLDO (which is a low-power  
linear regulator supplied by the system VIO supply) provide the BCM89359 with all the voltages it requires,  
further reducing leakage currents.  
BCM89359 PMU Features  
VBAT to 1.35Vout (600 mA maximum) core-buck (CBUCK) switching regulator  
VBAT to 3.3Vout (650 mA maximum) PALDO3P3  
VBAT to 3.3Vout (200 mA maximum) LDO3P3  
VBAT to 2.5V out (70 mA maximum) BTLDO2P5  
1.35V to 1.2Vout (150 mA maximum) LNLDO  
1.35V to 1.2Vout (420 mA maximum) CLDO with bypass mode for deep-sleep  
1.35V to 1.2Vout (100 mA maximum) HLDO  
VDDIO to 0.9Vout (10 mA maximum) MEMLPLDO  
VDDIO to 1.1Vout (3 mA maximum) LPLDO  
Additional internal LDOs (not externally accessible)  
PMU internal timer auto-calibration by the crystal clock for precise wake-up timing from extremely low  
power-consumption mode  
PMU input supplies automatic sensing and fast switching to support MM WC operations  
Broadcom®  
September 9, 2014 • 89359-DS100-R  
Page 17  
BROADCOM CONFIDENTIAL  
 复制成功!