欢迎访问ic37.com |
会员登录 免费注册
发布采购

BCM4354XKUBGT 参数 Datasheet PDF下载

BCM4354XKUBGT图片预览
型号: BCM4354XKUBGT
PDF下载: 下载PDF文件 查看货源
内容描述: [Single-Chip 5G Wi-Fi IEEE 802.11ac 2×2 MAC/ Baseband/Radio with Integrated Bluetooth 4.1 and FM Receiver]
分类和应用:
文件页数/大小: 192 页 / 4575 K
品牌: CYPRESS [ CYPRESS ]
 浏览型号BCM4354XKUBGT的Datasheet PDF文件第1页浏览型号BCM4354XKUBGT的Datasheet PDF文件第3页浏览型号BCM4354XKUBGT的Datasheet PDF文件第4页浏览型号BCM4354XKUBGT的Datasheet PDF文件第5页浏览型号BCM4354XKUBGT的Datasheet PDF文件第6页浏览型号BCM4354XKUBGT的Datasheet PDF文件第7页浏览型号BCM4354XKUBGT的Datasheet PDF文件第8页浏览型号BCM4354XKUBGT的Datasheet PDF文件第9页  
DataSheet  
BCM4354  
Single-Chip 5G Wi-Fi IEEE 802.11ac 2×2 MAC/  
Baseband/Radio with Integrated Bluetooth 4.1  
and FM Receiver  
GENERAL DESCRIPTION  
The Broadcom® BCM4354 is a complete dual–band  
The BCM4354 uses advanced design techniques and  
process technology to reduce active and idle power,  
and includes an embedded power management unit  
that simplifies the system power topology.  
(2.4 GHz and 5 GHz) 5G Wi–Fi 2 × 2 MIMO® MAC/  
PHY/Radio System–on–a–Chip. This Wi–Fi single–  
chip device provides a high level of integration with  
dual–stream IEEE 802.11ac MAC/baseband/radio,  
Bluetooth 4.1, and FM radio receiver. In IEEE  
802.11ac mode, the WLAN operation supports rates  
of MCS0–MCS9 (up to 256 QAM) in 20 MHz, 40 MHz,  
and 80 MHz channels for data rates up to 867 Mbps.  
In addition, all the rates specified in IEEE 802.11a/b/  
g/n are supported. Included on–chip are 2.4 GHz and  
5 GHz transmit power amplifiers and receive low  
noise amplifiers.  
In addition, the BCM4354 implements highly  
sophisticated enhanced collaborative coexistence  
hardware mechanisms and algorithms that ensure  
that WLAN and Bluetooth collaboration is optimized  
for maximum performance. Coexistence support for  
external radios (such as LTE cellular and GPS) is  
provided via an external interface. As a result,  
enhanced overall quality for simultaneous voice,  
video, and data transmission on a handheld system is  
achieved.  
For the WLAN section, several alternative host  
interface options are included: an SDIO v3.0 interface  
that can operate in 4b or 1b modes, a high-speed  
inter-chip (HSIC) interface, and a PCIe v3.0 compliant  
interface running at Gen1 speeds. For the Bluetooth  
section, host interface options of a high-speed 4-wire  
UART and USB 2.0 full-speed (12 Mbps) are  
provided.  
Figure 1: Functional Block Diagram  
VIO  
VBAT  
WL_REG_ON  
WLAN  
Host I/F  
PCIe  
SDIO  
HSIC  
T/R Switch  
T/R Switch  
T/R Switch  
5G WLAN  
2G WLAN  
5G WLAN  
Ant1  
Ant0  
Diplexer  
Diplexer  
External  
Coexistence I/F  
COEX  
CLK_REQ  
BT_REG_ON  
UART  
BCM4354  
USB 2.0  
2G WLAN Tx  
2.G WL/BT Rx  
Bluetooth Host I/F  
FM Rx Host I/F  
I2S  
3PST Switch  
PCM  
BT_DEV_WAKE  
BT_HOST_WAKE  
BT Tx  
FM Rx  
FM Audio Out  
I2S  
FM I/F  
4354-DS109-R  
5300 California Avenue • Irvine, CA 92617 • Phone: 949-926-5000 • Fax: 949-926-5203  
October 15, 2014  
 复制成功!