BCM4354 Data Sheet
WLAN 2.4 GHz Transmitter Performance Specifications
Table 40: WLAN 2.4 GHz Transmitter Performance Specifications (Cont.)
Parameter
Condition/Notes
Min.
Typ.
Max.
Unit
–
EVM Does Not Exceed
TX power at RF port for
highest power level setting
at 25°C with spectral mask
and EVM complianceb
802.11b
–9 dB
18
19.5
–
dBm
(DSSS/CCK)
OFDM, BPSK
OFDM, QPSK
–8 dB
18
19
19
18
17
–
–
–
–
dBm
dBm
dBm
dBm
–13 dB
18
OFDM, 16-QAM –19 dB
OFDM, 64-QAM –25 dB
(R = 3/4)
16.5
15.5
OFDM, 64-QAM –28 dB
(R = 5/6)
14.5
16
–
dBm
OFDM, 256-QAM –30 dB
(R = 3/4, VHT20)
13.5
12
15
13.5
0.45
–
–
–
–
–
dBm
dBm
OFDM, 256-QAM –32 dB
(R = 5/6, VHT20)
Phase noise
37.4 MHz Crystal, Integrated from –
10 kHz to 10 MHz
Degrees
dB
TX power control dynamic
range
–
10
Closed-loop TX power
Across full temperature and
–
–
±1.5
dB
variation at highest power voltage range. Applies across 10
level setting
dBm to 20 dBm output power
range.
Carrier suppression
Gain control step
–
–
15
–
–
–
–
–
dBc
dB
0.25
6
Return loss at chip port TX Zo = 50ꢀ
–
dB
a. The cellular standards listed only indicate the typical usages of that band in some countries: other standards
may also be used within those bands
b. Derate by 1.5 dB for temperatures higher than 55°C, or supply voltages lower than 3.0V. Derate by 3.0 dB for
supply voltages of lower than 2.7V, or supply voltages lower than 3.0V at temperatures higher than 55°C.
Broadcom®
October 15, 2014 • 4354-DS109-R
Page 148
BROADCOM CONFIDENTIAL