BCM4330 Preliminary Data Sheet
WLAN 2.4 GHz Receiver Performance Specifications
Table 34: WLAN 2.4 GHz Receiver Performance Specifications (Cont.)
Parameter
Condition/Notes
Minimum Typical Maximum Unit
Adjacent channel
rejection-OFDM
6 Mbps OFDM
9 Mbps OFDM
12 Mbps OFDM
18 Mbps OFDM
24 Mbps OFDM
36 Mbps OFDM
48 Mbps OFDM
54 Mbps OFDM
–79 dBm
–78 dBm
–76 dBm
–74 dBm
–71 dBm
–67 dBm
–63 dBm
–62 dBm
–61 dBm
–62 dBm
–63 dBm
–67 dBm
–71 dBm
–74 dBm
–76 dBm
–79 dBm
–
16
15
13
11
8
4
0
–1
–2
–1
0
4
8
11
13
16
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
105
3
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
5
8
13
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
(Difference between
interfering and desired
signal (25 MHz apart) at
10% PER for 1024 octet
PSDU with desired signal
level as specified in
Condition/Notes)
Adjacentchannelrejection MCS7
MCS0–7 (Difference
MCS6
between interfering and
MCS5
MCS4
MCS3
MCS2
MCS1
MCS0
–
desired signal (25 MHz
apart) at 10% PER for 4096
octet PSDU with desired
signal level as specified in
Condition/Notes)
Maximum receiver gain
Gain control step
–
–
–
e
RSSI accuracy
Range –98 dBm to –30 dBm
Range above –30 dBm
Zo = 50Ω, across the dynamic range
–5
–8
10
–
–
11.5
Return loss
a. Derate by 1.5 dB for –30 °C to –10°C and 55°C to 85°C.
b. Sensitivity degradations for alternate settings in MCS modes. MM: 0.5 dB drop, SGI: 2 dB drop, and STBC: 0.75
dB drop.
c. The cellular standard listed for each band indicates the type of modulation used to generate the interfering
signal in that band for the purpose of this test. It is not intended to indicate any specific usage of each band
in any specific country.
d. The blocking levels are valid for channels 1 to 11. (For higher channels, the performance may be lower due to
third harmonic signals (3 × 824 MHz) falling within band.)
e. The minimum and maximum values shown have a 95% confidence level.
®
BROADCOM
BCM4330 Preliminary Data Sheet
April 28, 2011 • 4330-DS304-RI
Page 136
CYPRESS [ CYPRESS ]
