BCM4319 Preliminary Data Sheet
2.4 GHz Band Receiver RF Specifications
Table 14: 2.4 GHz Band Receiver RF Specifications (Cont.)
Parameter
Condition/Notes
Min
Typa Max
Unit
–79 dBm
–78 dBm
–76 dBm
–74 dBm
–71 dBm
–67 dBm
–63 dBm
–62 dBm
–61 dBm
–62 dBm
–63 dBm
–67 dBm
–71 dBm
–74 dBm
–76 dBm
–79 dBm
–
16
15
13
11
8
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
5
8
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
Adjacent channel rejection-OFDM 6 Mbps OFDM
(Difference between interfering and
9 Mbps OFDM
desired signal (25 MHz apart) at
10% PER for 1024 octet PSDU with
–
12 Mbps OFDM
–
18 Mbps OFDM
24 Mbps OFDM
36 Mbps OFDM
48 Mbps OFDM
54 Mbps OFDM
desired signal level as specified in
Condition/Notes)
–
4
–
0
–
–1
–2
–1
0
–
–
Adjacent channel rejection MCS0– MCS7
7 (Difference between interfering
and desired signal (25 MHz apart)
at 10% PER for 4096 octet PSDU
–
MCS6
–
MCS5
with desired signal level as
MCS4
4
–
specified in Condition/Notes)
8
–
MCS3
11
13
16
–
–
MCS2
MCS1
MCS0
–
–
105
3
Maximum receiver gain
Gain control step
–
–
–
–
RSSI accuracye
–5
–8
–
Range –98 dBm to –30 dBm
Range above –30 dBm
–
a. Values are measured at the input of the BCM4319. Thus, they include insertion losses from the integrated
baluns, but exclude losses from the external circuits.
b. The blocking levels are valid for channels 1 through 11. (For higher channels, the performance may be lower
due to third harmonic signals (3 × 824 MHz) falling within band.)
c. Derate by 1.5 dB for –30 °C to –10°C and 55°C to 85°C.
d. Sensitivity degradations for alternate settings in MCS modes. MM: 0.5 dB drop, SGI: 2 dB drop, and STBC: 0.75
dB drop.
e. The minimum and maximum values shown have 95% confidence
Broadcom®
Single-Chip IEEE 802.11™ a/b/g/n MAC/Baseband/Radio
Page 63
April 2, 2014 • 4319-DS05-R